PostScript PPD Printer Driver setting (Windows)
5
Click [Print] to perform printing from the application.
–
When the [Wait Mode] is selected, it stops without being printed.
–
When the [Proof and Print] is selected, only one set is printed and it
stops.
–
When the Mode Check screen is not displayed, press [MACHINE].
On the copier's control panel, the Mode Check screen appears.
6
Confirm the current settings.
–
If you do not change any setting, proceed to the step 9.
7
To change the setting, select the item to be changed and press the
[Change].
–
When storing the job in the hard disk, select [Output Application]
and press the [Change].
VarioPrint 1105
5
5-45