Oce VarioPrint 1105 User Manual page 216

5
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
Using the Wait Mode, you can store a print job in the copier built-in hard disk
as image and can output it again when required.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Properties] to open the [Printing Preferences] window and then
click [Advanced].
3
Click [,] besides the [Wait Mode] to display the list. Then select [Wait
Mode] or [Proof and Print] and click [OK] to close the [Advanced
Options] window.
– Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
– Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
4
Click [OK] to close the [Printing Preferences].
5-44
PostScript PPD Printer Driver setting (Windows)
VarioPrint 1105