Oce VarioPrint 1105 User Manual page 473

Utility Tool
Settings on the Copier
To run a print job over IPP, TCP/IP settings must have been previously
established.
You can also set IPP attributes. To do this, contact your network
administrator about network setting.
Settings on Windows 2000
Complete the steps shown below to add the printer on your computer
running under Windows 2000. TCP/IP settings must have already been set
up on your computer. You need the accompanying CD-ROM which includes
the printer driver.
1
Click [Start], and select [Printers] from [Settings].
2
Double-click [Add Printer] to run the [Add Printer Wizard].
3
Click [Next].
4
Choose [Network printer] and click [Next].
5
Choose [Connect to a printer on the Internet or your intranet].
6
Enter the copier's URL in the [URL] field like this:
– http:// printer's IP address: 631/ipp
– In the "printer's IP address" column, enter the IP address assigned
to your Network Interface Card. Alternatively, you can enter the
host name of the printer's (NIC's) host name if DNS is set up on your
network.
– If you designate the proxy setting in your Internet Explorer, you may
access your printer over IPP. For more information contact your
network administrator.
7
Click [Next].
The [Add Printer Wizard] will appear.
8
The wizard will take you through the process of installing the printer
driver of the [Add Printer Wizard].
VarioPrint 1105
11
11-31