Oce VarioPrint 1105 User Manual page 122

4
!
Detail
For more information about the method of storing the job in and
outputting it from the hard disk, refer to "User manual (Network
Scanner)".
Output - Copies
Sets the number of copies to be printed.
Output - Output Tray
Sets [Default], [Multi Folder Sub Tray], [Saddle-Stitcher Sub Tray], [Stapler
Main Tray], or [Stapler Sub Tray] as [Output Tray].
Each of them can/cannot be set in the following cases:
- An item other than [Default] need to be selected on the [Option] tab,
respectively.
- [Default] can be set when no option is selected in the [Option] tab.
- When [Staple] is available in [Setup] tab, items other than [Default] and
[Stapler Main Tray] cannot be set.
Output - Output Order
Changes the output order.
[Face Down] outputs paper with the printed side facing down.
[Face Up] outputs paper with the printed side facing up.
"(1 to N)" means to output paper starting with the first page.
"(N to 1)" means to output paper starting with the last page.
Output - Collate
Prints the first one set of prints in one lot, and then the second set of prints,
the third set of prints, when printing multiple sets of pages.
Output - Offset
Only when the finisher unit has been setup, select to shift the next position
of each set of print out back and forth when printing multi set of copies.
4-42
PCL Printer Driver Setting (Windows)
VarioPrint 1105