Oce VarioPrint 1105 User Manual page 492

11
Setting Up System V Release 4 and Solaris 2.X to Use lpd
If your system recognizes the LPSYSTEM command, you do not need to
install the dedicated utility, Océ's host-side software. Another option is the
admintool if your system supports it.
LPSYSTEM Installation
The following procedure must be executed from the Bourne Shell.
Type: SH then press Enter to enter the Bourne Shell program.
Use the following procedures to install LPSYSTEM:
1
lpsystem -t bsd < Print server host name in /etc/hosts file >
2
lpadmin -p <local printername> -s <remote host name or IP address>
– !PRINT
– Your system may want its IP address instead of the remote host
name.
3
Enable <local printername>
4
Accept <local printername>
5
Printing on Linux
11-50
Utility Tool
VarioPrint 1105