Adjustment; Print Density; Smoothing - Type - Oce VarioPrint 1105 User Manual

Print operations

Hide thumbs Also See for VarioPrint 1105:

Table of Contents

6.16.3 Adjustment

Adjustment - Slider A

Adjustment - Slider B

Determines the print density of a graphic.

If a graphic appears too dark, move the slider towards [Light]. If the graphic

appears too light, move the slider towards [Dark]. The default setting is

Prints the curved section of characters and images smoothly, when this

printing system is used.

- [Type 1] is suitable for printing the diagonal lines of normal characters

and graphics.[Type 2] is suitable for printing the curved sections of

normal characters.[Type 3] is suitable for printing the curved sections of

ornamental writings and fine characters.

- When [Off] is selected, no smoothing operation is made.

If the graphic appears too bright, slide the brightness slider to the left.

If the graphic appears too dark, slide the brightness slider to the right.

To decrease contrast, slide the contrast slider to the left.

To increase contrast, slide the contrast slider to the right.

PS Printer Driver setting (Windows)

VarioPrint 1105