Utility Tool
Setting Up an AIX 4.0 System
Use these procedures to install the network interface card in a AIX 4.0
system:
1
Run SMIT Printer.
2
Select [Print Spooling].
3
Select [Add a Print Queue].
4
Select [Remote].
5
Use [Standard Processing].
6
Assign a queue name.
7
Use the host address of the Network Interface Card for the Remote
System.
8
Use [PRINT] for the queue on the remote system.
9
Add a description (optional).
10
Press [Enter] to generate.
–
Installation is complete. Test your printer by executing the following
command:
–
lp -d<queue_name> <file_name>
VarioPrint 1105
11
11-45