Setting Up Polling Sending; Before You Can Be Polled To Send; Setting Up A Polling Box - Canon FAX-L360 User Manual

Setting Up Polling Sending

This section shows you how to set up your fax to store and hold a document until it
is polled by another fax to send it.

Before You Can Be Polled to Send

Before you set up your polling box, contact the parties who are going to poll your
fax to receive documents and confirm the following points:
❏ If you are using an ITU-T password for the polling box, they must also know
this password. This password setting is optional.
❏ Your TX PASSWORD must match the ITU-T password attached when the
other party calls you. Confirm that the TX PASSWORD on your fax matches
the ITU-T password attached when the other party calls you.
❏ If the other party's fax does not support ITU-T subaddress/password
transactions, do not set the password.

Setting Up a Polling Box

Before you can use polling sending, you must create a polling box with the
POLLING BOX of the Menu System. The polling box holds the document in the
memory until the other party prompts (polls) your fax to send the document.
1. Open One-Touch Speed Dial panel.
2. Press Data Registration.
Registration
9-6 Setting Up and Using Polling
Data
EGIST ATION
1.DATA EGST ATION
Chapter 9