Removing Shipping Materials
In order to protect your FAX-L360 during shipping, the unit has been packed with
protective material that you must remove before using. Follow these steps:
1. Remove all pieces of shipping tape from the outside of the FAX-L360.
2. Open the operation panel by grasping it with both hands and gently pulling it
toward you.
Remove protective sheet from the Automatic Document Feeder (ADF), then
gently close the operation panel by pressing it down from the centre until it
clicks.
The actual shipping materials may differ in shape, quantity, and position from the
ones shown above.
Note
Chapter 2
Setting Up Your FAX-L360
2-7