Memory Sending - Canon FAX-L360 User Manual

Memory Sending

Memory sending is a quick and easy way to send a fax. The FAX-L360 scans the
document into its memory as it dials the fax number. If the line is free, the
FAX-L360 begins sending the fax as it scans the rest of the document.
The FAX-L360 has enough memory to store up to 400 pages (fewer if the
document contains many graphics or particularly dense text).
Follow the instructions below to send a document with memory sending:
Be sure to adjust the document feed lever before loading your document. See
page 6-6 for details.
Note
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
❏ Once the document is loaded, the LCD display shows the following:
❏ If necessary, you can adjust the resolution and contrast. See page 6-13 for
❏ You may not be able to use memory sending if the percentage shown in the
2. Dial the other party's fax number.
❏ Use one of the dialling methods described on page 6-17.
❏ If you must first dial a digit to get an outside line ("9" for example), add a
6-20 Sending Faxes
details.
MEMORY USED display is close to 100%. In this case, use manual
sending via the handset to send your document.
pause after that digit by pressing the Redial/Pause button, as shown in the
example above.
E ORY USED
DOCU ENT READY
TEL 9p8334777
0%
Chapter 6