Canon FAX-L360 User Manual page 167

4. Press Set.
Set
5. Enter the destination(s) using any of the following three methods.
❏ One-Touch Speed Dialling:
❏ Coded Speed Dialling:
❏ Regular Dialling:
6. When you finish entering numbers, press Start/Copy.
❏ The FAX-L360 begins scanning the document into memory.
❏ If the FAX-L360 memory becomes full while scanning your document,
MEMORY FULL appears in the LCD display. If this happens, you cannot send
the document at a delayed time. See page 6-24 to remove your document from
Note
the Automatic Document Feeder (ADF).
❏ You can only register one preset sending operation at a time.
When the set time comes, the FAX-L360 dials and sends the document.
Chapter 6
Press the desired One-Touch Speed Dialling button(s).
~
01
32
Press Coded Dial, then enter the two-digit code (00-99) using the numeric
buttons.
Coded Dial
~
0 9
• Be sure to press Coded Dial before each code.
Enter the number using the numeric buttons or Redial/Pause button.
Redial/Pause
~
0 9
or
• You can only enter one number with the numeric buttons.
ELAYE TX
SELECT LOCATIONS
TEL
Sending Faxes 6-35