Canon FAX-L360 User Manual page 304

TX SETTINGS
For details on accessing the settings below, see page 15-7.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
1.ECM TX
2.MID PAUSE SET
3.AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
4.TIME OUT
15-8 The Menu System
Description
Enables/disables Error Correction Mode (ECM) during
transmission.
Selects the length of a pause entered within a fax/telephone
number with the Redial/Pause button.
Enables/disables automatic redialling if the other party's line is
busy on the first attempt (See page 6-26.).
Selects the number of redial attempts.
Selects the time interval between redial attempts.
Enables/disables automatic scanning of documents after the fax
number is entered.
ON: Scanning begins automatically five seconds after entering
the fax number (10 seconds if sending to multiple fax numbers).
OFF: Scanning does not start automatically. (You need to press
Start/Copy to begin scanning.)
Sub-Settings
ON
OFF
2 SEC (1 to 15)
ON
OFF
2 TIMES (1 to 10)
2 MIN. (2 to 99)
ON
OFF
Chapter 15