SUPER G3 FAX-L2000 To Register Sender’s Identification Sending Documents Setting Up Speed Dialing One-touch Speed Dial Coded Speed Dial Group Dial To Erase Auto-Dialing Numbers One-touch Speed Dial Coded Speed Dial Group Dial Sending To More Than One Location (Sequential Broadcasting)
SUPER G3 FAX-L2000 Setting Up Transmission (TX) Report For Every Document Sent Out XIII Erasing A Document That Is Queuing To Be Sent From The Memory XIV Check The Status / Result Of A Fax Transaction PAGE...
TO REGISTER SENDER IDENTIFICATION INPUT YOUR FAX NUMBER AND COMPANY NAME Open all three all three panel covers Press Data Registration Press ▼ until display shows “3. FAX SETTINGS” Press OK to display “1. USER SETTINGS” Press OK to display “1. TEL LINE SETTINGS” Press OK to display “1.
SENDING A DOCUMENT DIRECT SENDING Place documents face up on the feeder Press DIRECT TX (indicator lights up) Enter fax number Press START MEMORY SENDING Place documents face up on the feeder Make sure DIRECT TX is “off” Enter fax number Press START Take note of “...
Page 6
TO STORE FAX NUMBERS ONE-TOUCH SPEED DIAL ( 01-KEY TO 72-KEY ) Open all three panel covers Press Data Registration Press ▼ until display shows “4. ADD. REGISTRATION” Press OK twice Press ▼ (if necessary) until an empty space appears Press OK twice Enter fax number Press OK twice...
Page 7
CODED SPEED DIAL (*000 TO *127 ) Open all three panel covers Press Data Registration Press ▼ until display shows “4. ADD. REGISTRATION” Press OK Press ▼ to display “2. CODED SPD DIAL” Press OK Press ▼ (if necessary) until an empty space appears Press OK twice Enter fax number Press OK twice...
Page 8
TO PROGRAM GROUP DIAL Open all three panel covers Press Data Registration Press ▼ until display shows “4. ADD. REGISTRATION” Press OK Press ▼ to display “3. GROUP DIAL” Press OK Press ▼ (if necessary) until an empty space appears Press OK twice Close all three panel covers &...
TO ERASE A SPEED DIAL TO CANCEL A NUMBER IN THE ONE-TOUCH SPEED DIAL Follow steps A.1. to A.4. (Refer to III : TO STORE FAX NUMBERS: ONE-TOUCH SPEED DIAL) Close all three panel covers & press desired one-touch key Press OK twice Press C to clear the number Press OK to delete the whole entry...
SENDING TO MORE THAN ONE LOCATION (SEQUENTIAL BROADCASTING) USING ONE-TOUCH / CODED SPEED DIAL Place documents face up on the feeder Press all the relevant one-touch / coded-dial numbers one right after another Press START Take note of “ TX / RX ” number MANUAL DIALING FROM THE NUMERIC 10-KEY PAD Place documents face up on the feeder Enter one fax number...
TO SEND DOCUMENTS AT A LATER TIME (DELAYED TRANSMISSION) Open all three panel covers Press Delayed Transmission Enter the desired time (time set must be within 24 hours from the time on the display) Press OK Enter the fax number(s) Press Start Place documents face up on the feeder Take note of “...
Page 12
WHEN THE FAX DISPLAYS “RECEIVED IN MEMORY” Display screen flashes message “RECEIVED IN MEMORY” repeatedly. Supply paper to the paper cassette if display prompts “SUPPLY REC. PAPER” Replace the toner cartridge if display prompts “REPLACE CARTRIDGE” Pick up the printed paper in the output/receiving trays if display prompts “OUTPUT TRAY FULL”...
Page 13
VIII RE-SENDING IF No.VII ABOVE IS NOT POSSIBLE, EACH DOCUMENT RECEIVED IN THE MEMORY CAN BE RE-SENT INDIVIDUALLY TO ANOTHER DESTINATION FOR PRINTING Open all three panel covers Press Memory Reference Press ▼ to display “4. RESEND DOCUMENT” Press OK Press ▼...
TO PRINT REPORTS AND LISTINGS SPEED DIAL LIST Open all three panel covers Press Report ▼ Press to display “2. SPEED DIAL LIST” Press OK ▼ Press to search for desired list i.e. “1. 1-TOUCH LIST”, “2. CODED DIAL LIST” or “3.GROUP DIAL LIST”...
Page 15
MAKING COPIES Place documents face up on the feeder Press COPY Press ▼ to select paper cassette, if required Enter the number of copies required (01 to 99) To re-enter the number, press C Press START To cancel the printing, press Stop to start copying...
Page 16
CONFIRMATION REPORT To Request For A Transmission (TX) Report Only For One Particular Sending Setting up the Program One-Touch Key Open all three all three panel covers Press Data Registration Press ▼ until display shows “3. FAX SETTINGS” Press OK to display “1. USER SETTINGS” Press OK Press ▼...
Page 17
TRANSMISSION REPORT To set up Transmission (TX) Report For Every Document Sent Out Open all three panel covers Press Data Registration Press ▼ until display shows “3. FAX SETTINGS” Press OK Press ▼ to display “2. REPORT SETTINGS” Press OK twice Press ▼...
Page 18
XIII ERASING A DOCUMENT FROM THE MEMORY Using the DELETE FILE Button Press Delete File Press ▼ to select the desired TX/RX number to be deleted Press OK Press * to confirm deletion Using The Memory Reference Button Press Memory Reference Press ▼...
Page 19
XIV TO CHECK THE STATUS OF A FAX TRANSACTION The Status Of A Pending Job Press Monitor Press OK to check the status of a transaction Press ▼ to select the list of TX/RX jobs To end, press Stop The Result after Sending / Receiving Press Monitor Press ▼...