Setting The Rx Mode - Canon FAX-L360 User Manual

Setting the RX MODE

Set the FAX-L360 RX MODE as follows:
1. Open One-Touch Speed Dial panel, then press Data Registration.
2. Press Set.
3. Use
4. Press Set, then use
5. Press Set, then use
❏ If you select FAX/TEL AUTO SW, go to step 6 on page 7-8 to complete
❏ If you select FAX ONLY MODE, press Set, and then press Stop to return
7-4 Receiving Faxes
Registration
Set
@
or to select 4.RX SETTINGS.
or
Set
or
Set
the setting.
to standby mode.
Data
DATA EGST ATION
DATA EGST ATION
@
to select 2.RX MODE.
@
to select item.
EGIST ATION
1.DATA EGST ATION
1.USE SETTINGS
4. X SETTINGS
X SETTINGS
2. X MODE
X MODE
FAX ONLY MODE
X MODE
FAX/TEL AUTO SW
Chapter 7