Canon FAX-L360 User Manual page 43

Connect the power cord as follows:
1. Plug the supplied power cord into the power connector on the back of the
FAX-L360.
2. Plug the other end of the power cord into the outlet.
The FAX-L360 has no power switch, so its power is on as long as it is plugged in.
Once connected, though, the unit still needs to warm up before you can use it.
Note
❏ While the FAX-L360 is warming up, the message PLEASE WAIT appears
❏ When you connect the power cord to an AC outlet for the first time after
❏ When the date, the time, the receive mode, and the resolution mode
* The country selection feature is available for certain countries only.
Chapter 2
in the LCD display:
purchase, DISPLAY LANGUAGE will appear in the LCD display after
PLEASE WAIT. In this case, set the language for the LCD display, and the
country*. (See "Setting the Display Language and Country*" on
page 2-19.)
appear, the FAX-L360 is in standby mode and ready for use:
LEASE WAIT
31/12 2002 TUE 10:00
FaxOnly STANDARD
Setting Up Your FAX-L360 2-17