Canon FAX-L360 User Manual page 174

❏ F/T RING TIME
When your unit is set to receive both fax and telephone calls automatically, it
rings to alert you to pick up the handset if the call is from a person. If you do
not pick up the handset within a certain amount of time, the unit stops ringing.
Use this option to change the number of times the unit rings, from 10 to 60
seconds. The default is 22 seconds.
❏ DEFAULT ACTION
Not all fax machines are capable of sending a fax tone (the CNG tone that
warns the receiving fax machine that a fax is coming). For those cases the unit
may think that the call coming in is a voice call and rings to alert you of the call
(the amount of time it is going to ring is determined by the F/T RING TIME
setting above). If you do not answer the call, one of two things can happen:
1. If you set the DEFAULT ACTION to RECEIVE, the unit will switch to
2. If you set the DEFAULT ACTION to DISCONNECT, the unit will
7-6 Receiving Faxes
fax receive mode automatically at that point and start to receive the
document. If no document comes in, it disconnects the call after
approximately 40 seconds. The factory default setting is RECEIVE.
disconnect the phone call immediately freeing up your phone line at this
point.
Chapter 7