Setting Up Polling Sending; Setting Up A Polling Box - Canon FaxPhone L170 Basic Manual

Setting Up Polling Sending

This section shows you how to set up your fax to store and hold a document until it is polled by another fax to send it.

Setting Up a Polling Box

Before you can use polling sending, you must create a polling box with the <POLLING BOX> of the Menu. The polling box
holds the document in the memory until the other party prompts (polls) your fax to send the document, or until you delete
the document (see p. 8-6).
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <4.FAX SETTINGS> © press [Set].
3
Press [ (-)] or [ (+)] to select <6.POLLING BOX> © press [Set].
4
Press [ (-)] or [ (+)] to select <1.SETUP FILE> © press [Set].
5
Press [ (-)] or [ (+)] to select <1.FILE NAME> © press [Set].
6
Enter a file name for the polling box (up to 24 characters including spaces) using the numeric buttons © press [Set].
C A N O N T O K Y O
•
For details on how to enter or delete letters, see "Entering Numbers, Letters, and Symbols," on p. 3-1.
•
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
7
Press [ (-)] or [ (+)] to select <2.PASSWORD> © press [Set].
If you do not want to set a password, go to step 9.
8
Enter a password (up to 7 digits) using the numeric buttons © press [Set].
P A S S W O R D
NOTE
•
This password protects your polling box settings from unauthorized access. To change these settings later, you will have to enter this
password.
•
For details on how to enter or delete numbers, see "Entering Numbers, Letters, and Symbols," on p. 3-1.
9
Press [ (-)] or [ (+)] to select <3.ERASE AFTER TX> © press [Set].
S E T U P F I L E
3 . E R A S E A F T E R T X
: A S E T U P F I L E
©
2 . P A S S W O R D
S E T U P F I L E
©
1 2 3 4 5 6 7 3 . E R A S E A F T E R T X
E R A S E A F T E R T X
©
O N
Setting Up Polling Sending
8
8-3