Canon FAX-L360 User Manual page 306

RX SETTINGS
For details on accessing the settings below, see page 15-9.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
1.ECM RX
2.RX MODE
3.INCOMING RING
RING COUNT
4.MAN/AUTO SWITCH
F/T RING TIME
5.REMOTE RX
REMOTE RX ID
6.MEMORY RX
7.RX PAGE FOOTER
* This setting is available for certain countries only.
**Even if you have set INCOMING RING to ON, the FAX-L360 will only ring if you have connected the optional
handset or an extension telephone.
15-10 The Menu System
Description
Enables/disables Error Correction Mode (ECM) during reception. ON
Selects the receive mode (See Chapter 7.).
If you select FAX/TEL AUTO SW, you can select additional sub-
settings (See page 7-5.).
When the RX MODE setting is set to FAX ONLY MODE or FAX/
TEL AUTO SW, this setting enables/disables ringing when the
FAX receives a call.**
Selects the number of rings before the FAX begins receiving.
When the receive mode is set to MANUAL MODE, this setting
determines if the FAX switches to fax receive mode after it rings
for a specified time.
If you select ON above, this setting selects the length of time the
FAX rings before switching to fax receive mode.
Enables/disables remote receiving.
If you select ON above, this setting selects the remote receiving
ID.
Enables/disables reception of a document in the FAX's memory
when a problem occurs during reception.
Enables/disables printing of the reception date and time, page
number, and transaction number
(TX/RX NO.) at the bottom of each received fax page.
Sub-Settings
OFF
FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
OFF
ON
2 TIMES (1 to 99)
OFF
ON
15 SEC (1 to 99)
ON
OFF
25 (00 to 99)
ON
OFF
OFF
ON
Chapter 15