Save & Exit Setup; Exit Without Saving - DFI WB72-SC User Manual

Rev. a+ system board

Hide thumbs Also See for WB72-SC:

Table of Contents

3.1.13 Save & Exit Setup

When all the changes have been made, highlight "Save & Exit Setup"

and press <Enter>. The message below will appear:

Type "Y" and press <Enter>. The modifications you have made will

be written into the CMOS memory, and the system will reboot. You

will once again see the initial diagnostics on the screen. If you wish to

make additional changes to the setup, press <Ctrl> <Alt> <Esc>

simultaneously or <Del> after memory testing is done.

When you do not want to save the changes you have made,

highlight "Exit Without Saving" and press <Enter>. The message

below will appear:

Type "Y" and press <Enter>. The system will reboot and you will

once again see the initial diagnostics on the screen. If you wish to

make any changes to the setup, press <Ctrl> <Alt> <Esc>

simultaneously or <Del> after memory testing is done.

Save to CMOS and Exit (Y/N)? N

Quit Without Saving (Y/N)? N

Award BIOS Setup Utility

8 3

Table of Contents