Table of Contents
Advertisement
2
Hardware Installation
2.3 Jumper Settings for Clearing CMOS Data
Clear CMOS Data - Jumper JP6
If you encounter the following,
a) CMOS data becomes corrupted.
b ) You forgot the supervisor or user password.
c) You are unable to boot-up the computer system because the
processor's ratio/clock was incorrectly set in the BIOS.
you can reconfigure the system with the default values stored in the
ROM BIOS.
To load the default values stored in the ROM BIOS, please follow
the steps below.
1 . Power-off the system.
2 . Set JP6 pins 2 and 3 to On. Wait for a few seconds and set JP6
back to its default setting, pins 1 and 2 On.
18
1
2
3
1-2 On: Normal
(default)
1
2
3
2-3 On:
Clear CMOS Data
Advertisement
Table of Contents
