Table of Contents
Advertisement
3
Award BIOS Setup Utility
Typematic Rate Setting
Disabled Continually holding down a key on your keyboard will
Enabled The BIOS will not only report that the key is down,
Typematic Rate (Chars/Sec)
This field allows you to select the rate at which the keys are
accelerated.
Typematic Delay (Msec)
This field allows you to select the delay between when the key was
first depressed and when the acceleration begins.
Security Option
This field determines when the system will prompt for the password
- everytime the system boots or only when you enter the BIOS
setup. Set the password in the Set Supervisor/User Password
submenu.
System The system will not boot and access to Setup will be
Setup
OS Select for DRAM > 64MB
This field allows you to access the memory that is over 64MB in
OS/2. The options are: Non-OS2 and OS2.
6 0
cause the BIOS to report that the key is down.
but will first wait for a moment, and, if the key is still
down, it will begin to report that the key has been
depressed repeatedly. For example, you would use such
a feature to accelerate cursor movements with the
arrow keys. You can then select the typematic rate and
typematic delay in the "Typematic Rate (Chars/Sec)"
and "Typematic Delay (Msec)" fields below.
denied unless the correct password is entered at the
prompt.
The system will boot, but access to Setup will be denied
unless the correct password is entered at the prompt.
Advertisement
Table of Contents
