Table of Contents
Advertisement
detailed specification of the memory supported by the system
board. "Memory Frequency For" in the Advanced Chipset Features
submenu of the BIOS must be set accordingly.
2.2.1 Installing the DIM Module
A DIM module simply snaps into a DIMM socket on the system
board. Pin 1 of the DIM module must correspond with Pin 1 of the
socket.
Tab
Pin 1
1 . Pull the "tabs" which are at the ends of the socket to the side.
2 . Position the DIMM above the socket with the "notches" in the
module aligned with the "keys" on the socket.
3 . Seat the module vertically into the socket. Make sure it is
completely seated. The tabs will hold the DIMM in place.
Hardware Installation
Notch
Key
2
Tab
17
Advertisement
Table of Contents
