Table of Contents
Advertisement
IRQ Resources
This field is used to set each system interrupt to either Legacy ISA
or PCI.
PCI
For devices compliant with the PCI bus architecture.
Legacy ISA For devices compliant with the original PC AT bus
specification.
PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can
work with PCI/VGA or not. The default value is Disabled.
Enabled MPEG ISA/VESA VGA cards work with PCI/VGA.
Disabled MPEG ISA/VESA VGA cards does not work with PCI/
VGA.
PCI IRQ Assignment
By default, an IRQ is automatically assigned to the PCI devices that
are installed in the PCI slots. If a PCI device has not been assigned
an IRQ, you must manually assign an IRQ for the device. During
system boot-up, you will see "NA" for the device that does not
have an IRQ assigned.
Award BIOS Setup Utility
3
7 7
Advertisement
Table of Contents
