DFI WB72-SC User Manual page 51

Rev. a+ system board
Hide thumbs Also See for WB72-SC:
Table of Contents

Advertisement

3
Award BIOS Setup Utility
Halt On
This field determines whether the system will stop if an error is
detected during power up.
No Errors The system boot will not stop for any errors detected.
All Errors The system boot will stop whenever the BIOS detects
All, But Keyboard The system boot will not stop for a keyboard
All, But Diskette
All, But Disk/Key
Base Memory
Displays the amount of base (or conventional) memory installed in
the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or 640K
for systems with 640K or more memory installed on the
motherboard.
Extended Memory
Displays the amount of extended memory detected during boot-up.
Total Memory
Displays the total memory available in the system.
5 6
a non-fatal error.
error; it will stop for all other errors.
The system boot will not stop for a disk error;
it will stop for all other errors.
The system boot will not stop for a disk or
keyboard error; it will stop for all other errors.

Advertisement

Table of Contents
loading

Table of Contents