Table of Contents
Advertisement
1
Introduction
1.1.3 Intelligence
Automatic System/Second Fan Off
The system and second fans will automatically turn off
once the system enters the Suspend mode.
Dual Function Power Button
Depending on the setting in the "Soft-Off By PWR-
BTTN" field of the Power Management Setup, this switch
will allow the system to enter the Soft-Off or Suspend
mode.
Wake-On-Ring
This feature allows the system that is in the Suspend
mode or Soft Power Off mode to wake-up/power-on to
respond to calls coming through an internal or external
modem. Refer to "Wake-On-Ring Connector" in chapter
2 and "Resume On Ring" in the Power Management
Setup section in chapter 3 for more information.
Wake-On-LAN
The Wake-On-LAN function allows the network to
remotely wake up a Soft Power Down (Soft-Off) PC.
Your LAN card must support the remote wakeup
function. Refer to "Wake-On-LAN Connector" in chapter
2 and "Resume On LAN" in the Power Management
Setup section in chapter 3 for more information.
10
Important:
If you are using a modem add-in card, the 5VSB
power source of your power supply must support
720mA.
Important:
The 5VSB power source of your power supply
must support 720mA.
Advertisement
Table of Contents
