Table of Contents
Advertisement
3
Award BIOS Setup Utility
Auto The BIOS will automatically set the system according to
Mode 0-4 You can select a mode that matches your hard disk
IDE Primary Master/Slave UDMA and IDE Secondary Master/
Slave UDMA
These fields allow you to set the Ultra DMA in use. When Auto is
selected, the BIOS will select the best available option after checking
your hard drive or CD-ROM.
Auto
Disabled The BIOS will not detect these categories.
USB Controller
We recommend that you leave this field in its default setting -
Enabled.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this
function.
Init Display First
This field is used to select whether to initialize the AGP or PCI first
when the system boots.
AGP
PCI Slot
AC97 Audio
Auto
Disabled Select this option when using a PCI sound card.
6 6
your hard disk drive's timing.
drive's timing. Caution: Do not use the wrong setting
or you will have drive errors.
The BIOS will automatically detect the settings for you.
When the system boots, it will first initialize the AGP.
When the system boots, it will first initialize PCI.
Select this option when using the onboard audio codec,
primary or secondary audio riser card, or audio/modem
riser card.
Advertisement
Table of Contents
