Table of Contents
Advertisement
3.1.2 Advanced BIOS Features
The Advanced BIOS Features allows you to configure your system
for basic operation. Some entries are defaults required by the system
board, while others, if enabled, will improve the performance of your
system or let you set some features according to your preference.
BIOS Flash Protect
Promise RAID Control
Virus Warning
CPU L1 & L2 Cache
Quick Power On Self Test
RAID Chip Boot Device
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Typematic Rate Setting
X
Typematic Rate (Chars/Sec)
X
Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Move
F5:Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
BIOS Flash Protect
Enabled This option will protect the system from unnecessary
Disabled Disables the "BIOS flash protect" function, allowing you
Promise RAID Control
By default, the Promise RAID controller is enabled. If you are not
using this function, set this field to Disabled. The IRQ previously
occupied by the controller will be available for other devices.
Virus Warning
This field protects the boot sector and partition table of your hard disk
drive. When this field is enabled, the Award BIOS will monitor the boot
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Advanced BIOS Features
Disabled
Enabled
Disabled
Enabled
Enabled
RAID
Floppy
HDD-0
LS/ZIP
Enabled
Disabled
Disabled
On
Disabled
6
250
Setup
Non-OS2
Disabled
Enter:Select
+/-/PU/PD:Value
F6:Fail-Safe Defaults
updating or flashing of the BIOS. When enabled, it
secures the BIOS therefore any updates to the BIOS
will not take effect.
to update or flash the BIOS any time needed.
Award BIOS Setup Utility
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled and
someone attempt to
write data into this
area, BIOS will show a
warning message on
screen and alarm beep
F10:Save
ESC:Exit
F1:General Help
F7:Optimized Defaults
3
5 7
Advertisement
Table of Contents
