Save & Exit Setup - DFI G586OPA User Manual

PCI/ISA System Board
The screen displays the parameters detected and allows
you to accept or reject the parameters. Type "Y" and
press <Enter> to accept the parameters or press <Esc>
to abort. If you select "Y", the parameters of the hard
disk will be displayed in the Standard CMOS Setup.
Save & Exit Setup
When all the changes have been made, highlight "Save
& Exit Setup" and press <Enter>. The message below
will appear:
Type "Y" and press <Enter>. The following message
will appear:
3-19 u Initial Setup Program
Save to CMOS and Exit (Y/N)? N
Reboot System (Y/N)? N