Table of Contents
Advertisement
3
Award BIOS Setup Utility
Password
Hot Key
Mouse Left
Mouse Right When this option is selected, double-click the right
Any Key
Keyboard 98 When this option is selected, press the "wake up"
Onboard FDC Controller
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.
Onboard Serial Port 1 and Onboard Serial Port 2
Auto
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows
Disabled Disables the onboard serial port 1 and/or serial port 2.
6 8
When this option is selected, move the cursor to
the "KB Power On Password" field and press
<Enter>. Enter your password. You can enter up to
5 characters. Type in exactly the same password to
confirm, then press <Enter>.
Important:
The power button will not function once a
keyboard password has been set in the "KB
Power On Password" field. You must type the
correct password to power-on the system. If
you forgot the password, power-off the
system and remove the battery. Wait for a
few seconds and install it back before
powering-on the system.
When this option is selected, move the cursor to
the "KB Power On Hot Key" field to select a
function key you would like to use to power-on the
system. The options are from Ctrl-F1 to Ctrl-F12.
When this option is selected, double-click the left
button of the mouse to power-on the system.
button of the mouse to power-on the system.
Press any key to power-on the system.
key of the Windows 98 compatible keyboard to
power-on the system.
The system will automatically select an I/O address for
the onboard serial port 1 and serial port 2.
manually select an I/O address for the onboard serial
port 1 and serial port 2.
you
to
Advertisement
Table of Contents
