Setting And Using Camera Presets - Polycom HDX Desktop Systems User Manual

User's Guide for Polycom HDX Desktop Systems

Setting and Using Camera Presets

10
To open or close the privacy shutter:
! Move the slider to the left to close the privacy shutter, or to the right to
open it. You can still make and receive calls when the shutter is closed, but
the people at the far site cannot see you.
The light next to the shutter indicates camera status.
— Solid green means you are in a call.
— Flashing green means you are in a call but the shutter is completely
closed.
— Off means you are not in a call.
Camera presets are stored camera positions that you can create ahead of time
or during a call. You can create up to 100 preset camera positions (0-99) for the
built-in camera. They remain in effect until you delete or change them.
If far-site camera control is allowed, you can create up to 16 presets (0-15) for
the far-site camera. These presets are saved only for the duration of the call.
You may also be able to use presets that were created at the far site to control
the far-site camera.
To move the camera to a preset:
1. If a call is connected, press
2. Press a number on the keypad.
Selecting a preset for a content source toggles the content on and off.
Near or Far on the keypad.
© Polycom, Inc.