Showing Content With People+Content™ Ip - Polycom HDX Desktop Systems User Manual

User's Guide for Polycom HDX Desktop Systems
Showing Content with People+Content™ IP
16
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• People+Content must be enabled on the Polycom HDX system.
• The People+Content IP application must be installed on a computer.
• For a computer connected directly to the Polycom HDX system, Polycom
recommends using the
People+Content IP.
To install People+Content IP on a computer:
1. On a computer with a Microsoft® Windows® XP, Windows 2000, or
Windows Vista operating system, open a web browser and go to the
Polycom web site at www.polycom.com/support.
2. Navigate to your product page.
3. Download and install the People+Content IP software.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address or DNS host name of your video conferencing
system and the meeting password, if one is set.
3. Click Connect.
4. Open the content you want to show, and click
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Click
in People+Content IP.
To keep the call secure, content may be automatically stopped when a participant
joins the call.
Send Computer button instead of
in People+Content IP.
© Polycom, Inc.