Polycom HDX Systems Quick Start Manual

Using the Remote Control
Access the online help; see system
status in a call
Store camera presets (when followed by
a number); delete all camera presets
Cycle through display layouts
Select a far-site camera or video source
Adjust the camera; navigate through
menus
Increase or decrease the sound you hear
from the far sites
Select a near-site camera or video source
Return to the previous screen
Place or answer a call
Display the onscreen keyboard
Display menu of optional features
Enter a dot in an address
Press to power the system on; hold to power
off
View button presses and various menus
Select a camera or other video source
Start and stop sending content to far sites
Confirm your current selection; perform
functions on highlighted items
Zoom the camera in or out
Mute the microphone audio you're sending
to the far sites
Return to the Place a Call (home) screen
View or manage directory entries
End a call
Delete letters or numbers
Enter letters or numbers; move the
camera to a stored position
Control a programmed recording device
R
Placing a Video Call
Entering a Name or Number
1. Enter the ISDN number, IP address, or H.323
name. Include the dots in an IP address.
To enter text, press
remote control to access the onscreen keyboard.
2. Press Call on the remote control.
Using the Directory
1. Press Directory on the remote control.
2. Find the site you want to call. You can use the
arrow buttons, the alphabet tabs, or the Search
field.
3. Press Call on the remote control.
Using the Contacts, Speed Dial, or Recent Calls
Lists
1. In the Contacts, Speed Dial, or Recent Calls list,
find the site you want to call.
2. Press Call on the remote control.
Answering a Call
Press Call or select Yes using the remote control.
Ending a Call
1. Press Hang Up on the remote control.
2. If prompted, confirm that you want to hang up.
VIDEO VOICE
Keyboard on the
DATA WEB