Setting And Using Camera Presets - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Setting and Using Camera Presets

10
VSX S
ERIES
To adjust the main camera on the VSX 3000 system:
1. Position the camera up, down, to the left, or to the right manually:
2. Focus the camera by turning the focus wheel:
Camera presets are stored camera positions that you can create ahead of time
or during a call.
Presets allow you to:
Automatically point a camera at pre-defined locations in a room.
Select a video source such as a VCR or DVD player, a document camera,
or an auxiliary camera.
If your system's main camera supports electronic pan, tilt, and zoom
movement, you can create up to 100 preset camera positions for the near site.
Each preset stores the camera number, its zoom level, and the direction it
points (if appropriate). Near-site presets are available for VSX set-top and
component systems. They remain in effect until you delete or change them.
. . /
WWW POLYCOM COM VIDEODOCUMENTATION