Setting And Using Camera Presets - Polycom HDX Room Systems User Manual

Setting and Using Camera Presets

Polycom, Inc.
>> Press Near then press
out or in.
If you zoom in, you can pan or tilt the camera electronically by pressing
the arrow buttons on the remote control.
To open or close the privacy shutter on the Polycom EagleEye View camera:
>> Move the slider to the right to close the privacy shutter, or to the left to
open it. You can still make and receive calls when the shutter is closed, but
the people at the far site cannot see you.
Camera presets are stored camera positions that you can create ahead of time
or during a call.
Presets allow you to:
• Automatically point a camera at pre-defined locations in a room.
• Select a video source such as a VCR or DVD player, a document camera,
or an auxiliary camera.
If your system's camera supports pan, tilt, and zoom movement, you can
create up to 100 preset camera positions (0-99) for the near site. Each preset
stores the camera number, its zoom level, and the direction it points. Presets
remain in effect until you delete or change them.
User's Guide for Polycom HDX Room Systems
Zoom on the remote control to zoom
11