Polycom HDX8000 Quick Reference Manual

Turn On the System

Power on Polycom.

Power on Television, select the input signal source. The Polycom

startup screen should appear in 3-4 minutes. Once the "Dial Up"
screen shows, the system is ready for receiving call or placing a
call.

To Receive A Call From Polycom Conference Equipment

Wait for the "Dial In" tone and the "Dialer" IP address appears.

Check the "Dialer" IP address and accept the call.


To Place A Call To a Conference Equipment

 Display the onscreen keyboard to enter the text.
Enter the receiver's IP address on the screen using the remote

control with "dot" in the format: XXX.XXX.XXX.XXX
Place a call with the "Place or answer a call" button.


To Adjust the Volume

Press "+" or "-"


To Mute the Microphone


Press mute button.

To Zoom in/out

Press "+" or "-"

Please turn Off the Polycom and Television after use
Quick Reference Guide for Polycom HDX8000

To End a Call

 Press "End a call" button.
Confirm after prompted.
