AXIS 570/670 User's Manual
Section 9 Setting Up - Macintosh
Notes:
Installation Using the Chooser Window
Basic Configuration
Having connected the AXIS 570/570e to your network, this section
now describes how to set up your AXIS 570/570e for printing in
Macintosh environments using AppleTalk.
If you intend to operate your AXIS 570/570e in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - AS/400, on page 49
Section 5 Setting Up - IBM Mainframe, on page 87
Section 6 Setting Up - NetWare, on page 115
Section 7 Setting Up - Windows, on page 123
Section 8 Setting Up - OS/2, on page 145
Section 10 Setting Up - UNIX, on page 155
Only the AXIS 570 and the AXIS 570e models support the Apple
EtherTalk environment.
The AXIS 670 and the AXIS 670e models do NOT support the
Apple TokenTalk environment.
Basic configuration in AppleTalk is performed simply by opening the
Chooser window and selecting a printer.
You can change the default name of your AXIS 570/570e or any of
default parameters by editing the config file. To access the config file
from a Macintosh, you can use:
•
any standard Web browser
•
FTP using MacTCP, Fetch or Anarchie
Section 9: Setting Up - Macintosh
149