4.2.16 Web Firmware Upgrade
This page facilitates an update of the firmware controlling the Industrial Managed Switch. The Web Firmware Upgrade screen
in
Figure 4-2-19
appears.
To open Firmware Upgrade screen perform the folling:
1.
Click System -> Web Firmware Upgrade.
2.
The Firmware Upgrade screen is displayed as in
3.
Click the "
4.
Select on the firmware then click "
5.
Once the software be loaded to the system successfully. The following screen appears. The system will load the new
software after reboot.
DO NOT Power OFF
Do not quit the Firmware Upgrade page without press the "OK" button - after the image be
loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes again.
Figure 4-2-19: Web Firmware Upgrade Page Screenshot
"button of the main page, the system would pop up the file selection menu to choose firmware.
", the Software Upload Progress would show the file upload status.
Figure 4-2-20: Software successfully Loaded Notice Screen
the Industrial Managed Switch until the update progress is complete.
Figure
4-2-19.
77
User's Manual of IGS-10020MT