Action Parameters
Buttons
: Click to save the configuration and move to main QCL page
: Click to undo any changes made locally and revert to previously saved values
: Return to the previous page without saving the configuration change
4.9.12 QoS Status
This page shows the QCL status by different QCL users. Each row describes the QCE that is defined. It is a conflict if a specific
QCE is not applied to the hardware due to hardware limitations. The maximum number of QCEs is 256 on each switch. The
QoS Control List Status screen in
The page includes the following fields:
Object
User
QCE#
Frame Type
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
QoS
class: (0-7) or 'Default'.
Class
DP Valid
Drop Precedence Level
DSCP Valid
DSCP
value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or
'Default'.
'Default' means that the default classified value is not modified by this QCE.
Figure 4-9-15
appears.
Figure 4-9-15: QoS Control List Status Page Screenshot
Description
Indicates the QCL user.
Indicates the index of QCE.
Indicates the type of frame to look for incomming frames. Possible frame types
are:
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
can be (0-1) or 'Default'.
207
User's Manual of IGS-10020MT