Table of Contents
Advertisement
4.2.16 Web Firmware Upgrade
This Page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen in
appears.
To open Firmware Upgrade screen, perform the following:
1.
Click System -> Web Firmware Upgrade.
2.
The Firmware Upgrade screen is displayed as in
3.
Click the "
4.
Select on the firmware then click "
5.
Once the software is loaded to the system successfully, the following screen appears. The system will load the new
software after reboot.
DO NOT Power OFF
Do not quit the Firmware Upgrade Page without pressing the "OK" button after the image is
loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes.
Figure 4-2-19: Web Firmware Upgrade Page Screenshot
"button of the Main Page, the system would pop up the file selection menu to choose firmware.
", the Software Upload Progress would show the file with upload status.
Figure 4-2-20: Software Successfully Loaded Notice Screen
the Managed Switch until the update progress is complete.
Figure
4-2-19.
64
User's Manual of XGSW-28040HP
Figure 4-2-19
Advertisement
Table of Contents
