Lldp Command; Lldp Configuration; Lldp Mode - Planet IGS-10020MT User Manual

6.11 LLDP Command

LLDP Configuration

Description:
Show LLDP configuration.
Syntax:
LLDP Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show LLDP configuration of port1~4
IGS-10020MT:/>lldp configuration 1-4
LLDP Configuration:
===================
Interval : 30
Hold : 3
Tx Delay : 2
Reinit Delay: 2
Port Mode Port Descr System Name System Descr System Capa Mgmt Addr CDP awareness
---- -------- ----------
1 Enabled Enabled
2 Enabled Enabled
3 Enabled Enabled
4 Enabled Enabled

LLDP Mode

Description:
Set or show LLDP mode.
Syntax:
LLDP Mode [<port_list>] [enable|disable|rx|tx]
----------- ------------
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
466
User's Manual of IGS-10020MT
----------- ---------
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
-------------
Disabled
Disabled
Disabled
Disabled