Mldv2 Information - Planet IGS-10020MT User Manual

4.8.13 MLDv2 Information

Entries in the MLD SFM Information Table are shown on this page. The MLD SFM (Souce-Filtered Multicast) Information Table
also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by
Port No. Diffrent source addresses belong to the same group are treated as single entry.
Each page shows up to 64 entries from the MLD SFM Information table, default being 20, selected through the "entries per
page" input field. When first visited, the web page will show the first 20 entries from the beginning of the MLD SFM Information
Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD SSM Information Table.
The MLDv2 Information screen in
The page includes the following fields:
Object
 VLAN ID
 Group
 Port

Mode
 Source Address
 Type
 Hardware Filter /
Switch
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediate
: Updates the table starting from the first entry in the MLD SFM Information.
: Updates the table, starting with the entry after the last entry currently displayed.
Figure 4-8-16 appears.
Figure 4-8-16: MLD SSM Information Page Screenshot
Description
VLAN ID of the group.
Group address of the group displayed.
Switch port number.
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
Indicates the Type. It can be either Allow or Deny.
Indicates whether data plane destined to the specific group address from the
source IPv6 address could be handled by chip or not.
182
User's Manual of IGS-10020MT