Planet IGS-10020MT User Manual page 227

The page includes the following fields:
Object

Port

Policy ID

Action

Rate Limiter ID
 EVC Policer
 EVC Policer ID

Port Redirect
 Mirror
 Logging
 Shutdown
 State
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit". All means all ports will have one specific setting.
Select which rate limiter to apply to this port. The allowed values are Disabled
or the values 1 through 15. The default value is "Disabled". All means all ports
will have one specific setting.
Select whether EVC policer is enabled or disabled. The default value is
"Disabled". All means all ports will have one specific setting.
Select which EVC policer ID to apply on this port. The allowed values are
Disabled or the values 1 through 128.
Select which port frames are redirected on. The allowed values are Disabled or
a specific port number. The default value is "Disabled". All means all ports will
have one specific setting.
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
All means all ports will have one specific setting.
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate is limited.
All means all ports will have one specific setting.
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
All means all ports will have one specific setting.
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL
user module.
Disabled: To close ports by changing the volatile port configuration of the ACL
user module.
The default value is "Enabled".
227
User's Manual of IGS-10020MT