Cist Port Configuration - Planet IGS-10020MT User Manual

Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediate

4.7.4 CIST Port Configuration

This page allows the user to inspect the current STP CIST port configurations, and possibly change them as well. The CIST Port
Configuration screen in Figure 4-7-6
The page includes the following fields:
Object

Port

STP Enabled

Path Cost
appears.
Figure 4-7-6 : STP CIST Port Configuration Page Screenshot
Description
The switch port number of the logical STP port.
Controls whether RSTP is enabled on this switch port,
of Industrial Managed Switch.
Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The
path cost is used when establishing the active topology of the network. Lower
path cost ports are chosen as forwarding ports in favor of higher path cost ports.
Valid values are in the range 1 to 200000000. All means all ports will have one
specific setting.
155
User's Manual of IGS-10020MT
*
means to select all ports