Port Configuration:
Object
Port
Enable
Action
Tx Mode
Buttons
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
4.16.2 Status
This page displays the loop protection port status the ports from the Industrial Managed Switch.
Figure 4-16-2: Loop Protection Status Page Screenshot
The page includes the following fields:
Object
Port
Action
Transmit
Loops
Status
Loop
Time of Last Loop
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediate.
Description
The switch port number of the port.
Controls whether loop protection is enabled on this switch port.
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Description
The switch port number of the logical port.
The currently configured port action.
The currently configured port transmit mode.
The number of loops detected on this port.
The current loop protection status of the port.
Whether a loop is currently detected on the port.
The time of the last loop event detected.
323
User's Manual of IGS-10020MT