Port Classification - Planet IGS-10020MT User Manual

4.9.3 Port Classification

This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification
screen in Figure 4-9-2 appears.
The page includes the following fields:
Object
 Port
 QoS Class
 DP Level

PCP

DEI

Tag Class
Figure 4-9-2 : QoS Ingress Port Classification Page Screenshot
Description
The port number for which the configuration below applies.
The Configuration All with available values will assign to whole ports.
Controls the default QoS class, i.e., the QoS class for frames not classified in any
other way. There is a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority. All means all ports will have one
specific setting.
The Configuration All with available values will assign to whole ports.
Controls the default DP level, i.e., the DP level for frames not classified in any
other way. All means all ports will have one specific setting.
The Configuration All with available values will assign to whole ports.
Controls the default PCP for untagged frames. All means all ports will have one
specific setting.
The Configuration All with available values will assign to whole ports.
Controls the default DEI for untagged frames. All means all ports will have one
specific setting.
Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
190
User's Manual of IGS-10020MT