Igmp Snooping Vlan Configuration - Planet IGS-10020MT User Manual

 Fast Leave
 Throtting
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.8.3 IGMP Snooping VLAN Configuration

Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. The IGMP Snooping VLAN Configuration
screen in Figure 4-8-6 appears.
The page includes the following fields:
Object

VLAN ID
 IGMP Snooping Enable
 IGMP Querier
 Compatibility
If an aggregation member port is selected as a router port, the whole aggregation
will act as a router port. All means all ports will have one specific setting.
Enable the fast leave on the port.
The Configuration All with available values will assign to whole items.
Enable to limit the number of multicast groups to which a switch port can belong.
All means all ports will have one specific setting.
Figure 4-8-6: IGMP Snooping VLAN Configuration Page Screenshot
Description
The VLAN ID of the entry.
Enable the per-VLAN IGMP Snooping. Only up to 64 VLANs can be selected.
Enable the IGMP Querier in the VLAN.
Compatibility is maintained by hosts and routers taking appropriate actions
depending on the versions of IGMP operating on hosts and routers within a
network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IGMPv2,
Forced IGMPv3, default compatibility value is IGMP-Auto.
170
User's Manual of IGS-10020MT