Check Of The Measurement Result - Denon AVC-A1XV Operating Instructions Manual

V

. Check of the measurement result

• The results of the measured items can be checked.
For instructions on checking the equalizer parameters, see pages 43~45.
1
(Main unit)
2
(Main unit)
[Speaker Config. Check]
3
(Main unit)
4
(Main unit)
38
Select the items.
The measurement results of each item can be
CH SEL checked here.
ENTER
(Remote control unit)
Press the ENTER button and display the verification screen.
Press the ENTER button to switch to the second screen.
CH SEL
ENTER
NOTE:
• When measurements have been made using the measurement microphone, speakers
(Remote control unit)
with a built-in filter such as subwoofers might be set with a value that differs from the
physical distance because of the internal electrical delay.
[Delay Time Check]
If the check ends, press the ENTER button again.
CH SEL
ENTER
(Remote control unit)
Select whether or not to save the data you have
checked.
CH SEL Select the
ENTER
measurement results.
Store : Set with the checked measurement value.
Cancel : If you do not want to set the contents
(Remote control unit)
* A u t o S e t u p
S p C o n f i g . C h e c k
[Channel Level Check]
following items based
you have checked, cancel the auto setup
settings.
* A u t o S e t u p
S t o r e
[Crossover Freq. Check]
on the