Setting The Crossover Frequency For Zone2 - Denon AVC-A1XV Operating Instructions Manual

6-5. Setting the Crossover Frequency for ZONE2

• Set the frequency (in Hz) below which deep bass appearing in the main channels will be routed to the ZONE2 subwoofer.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
NOTES:
• For the majority of home theater speaker systems, we recommend that the crossover frequency be set to 80 Hz. When using very
compact speakers, however, it may be advantageous to select a higher crossover frequency. Check the specified low frequency limit of
each speaker (usually published in the specifications tables in speaker owner's manuals).
• The crossover frequency mode is valid only when subwoofer is set to ON, and when one or more speakers are set to SMALL, as
described in section "6-1. Speaker Configuration" settings. (See page 81)
Select the "Crossover Frequency" at the Zone Setup
menu.
CH SEL
ENTER
Display the Crossover Frequency screen.
CH SEL
ENTER
Select the frequency.
VARIABLE 40, 60, 80, 100, 120, 150, 200, 250 Hz :
CH SEL
ENTER
Set as desired according to your speakers' bass playback ability.
Enter the setting.
The Zone Setup menu reappears.
CH SEL
ENTER
* Z o n e S e t u p
Z 2 C r o s s o v e r
* Z 2 C r o s s o v e r
8 0 H z
87