Setting The Video Convert Mode - Denon AVC-A1XV Operating Instructions Manual

4
(Main unit) (Remote control unit)

4-2. Setting the Video Convert Mode

• Select the input signal to be output to the composite S-Video and component monitor output terminals using the video conversion function.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
q Select the input source for which you want to set the Video
Convert Mode.
(Main unit)
AUTO : When there are multiple input signals, the input signals are detected and the input signal to be output from the video
monitor output terminal is selected automatically in the following order: component video, S-Video, composite video.
Component : The signal connected to the component video terminal is always played.
The component input signal is down–converted and output from the composite and component monitor output terminal.
No image is output from the monitor output terminal when there is no input signal to the component input terminal.
S-Video : The signal connected to the S-Video terminal is always played.
The S-Video input signal is converted and output from the composite and component monitor output terminal.
Video : The signal connected to the composite video terminal is always played.
The composite video input signal is up-converted and output from the S-Video and component monitor output terminals.
OFF : The convert function does not operate.
The video signal input from the video input jack is only output to the video monitor out jack.
The S-Video signal input from the S-Video input jack is only output to the S-Video monitor out jack.
The component input signal input from the component input jacks is only output to the component monitor output
terminals.
NOTE:
• Down-converting from the component video signal to the S-Video and composite video signal is possible only when the resolution
of a component video signal is 480i / 576i.
Enter the setting.
The Video Setup menu reappears.
CH SEL
ENTER
Select "Video Convert Mode" at the Video Setup
menu.
CH SEL
ENTER
Display the Video Convert Mode screen.
CH SEL
ENTER
CH SEL
ENTER
(Remote control unit)
* V i d e o S e t u p
V i d e o M o d e
* V i d e o M o d e
D V D : A u t o
w Select the mode as below.
AUTO
The details in each mode are as follows.
Component S-video Video
CH SEL
ENTER
(Main unit) (Remote control unit)
OFF
67