Setting The Mic Input Select - Denon AVC-A1XV Operating Instructions Manual

1-4. Setting the MIC Input Select

• Sets whether the setup microphone is connected to the PIN JACK (V.AUX L channel) connector or the MINI JACK (SETUP MIC) connector.
• Use this setting when using a microphone other than the included one for measurements when performing the auto setup procedure.
• The microphone included with the AVC-A1XV is a measurement microphone designed specifically for use during the auto setup procedure.
Select "Mic" and connect the included microphone to the "SETUP MIC" mini-jack. When conducting the auto setup procedure using a separate
high performance condenser microphone for measurements, select "V.AUX L" and connect the microphone to the "V.AUX Lch" pin jack.
Please ask the DENON Authorized Service Center about the usable microphone other than the included one.
1
(Main unit)
2
(Main unit)
3
(Main unit)
4
(Main unit)
42
Select "Mic Input Select" at the Auto Setup / Room
EQ menu.
CH SEL
ENTER
(Remote control unit)
Display the Mic Input Select screen.
CH SEL
ENTER
(Remote control unit)
Select the Mic input jack or V.AUX L jack.
CH SEL
ENTER
(Remote control unit)
Enter the setting.
The Auto Setup / Room EQ menu reappears.
CH SEL
ENTER
(Remote control unit)
* A u t o S e t / R o o m E Q
M i c I n S e l e c t
* M i c I n S e l e c t
M i c